Img
X

13905360309

Address: The southern end of Luhai Road, Binhai Development Zone, Weifang, Shandong Province
Contact: Chen Jintuan
Phone:13905360309
Tel:0536-5333577
PC:262737
Web:
www.wfjintan.cn 收割机刀片.中国 金坛刀片.中国
E-mail:lily@wfjintan.cn   sgjintandp@163.com   

 913804916@qq.com

Copyright © 2020 Weifang Haihua Development Zone Jintan Harvester Blade Factory Copyright

Scan the QR code 

Weifang Haihua Development Zone Jintan Harvester Blade Factory

 

Weifang Haihua Development Zone Jintan Harvester Blade Factory is located at the southern end of Luhai Road in Binhai Development Zone. The company was established in 2001 and has modern plants and equipment. 

Arrow

NEWS

A backbone enterprise that produces 7 blades for combined harvesting, 7-blade straw mower blades and various accessories

 

155 Harvester Blade manufacturer takes you to understand: some common sense problems of harvester blades

Page view

The manufacturer of 155 Harvester Blade tells you that after the wheat harvest is over, the harvester blade should enter the maintenance stage, and the life of the harvester blade will be extended. Today, the manufacturer of 155 Harvester Blade will talk to you about the precautions in the process of reharing the blade, and Maintenance after harvest.

good price and quality 155 Harvester Blade Wholesale Price
1. The manufacturer of 155 Harvester Blade tells you to lubricate after harvesting. Before refueling, you should first clean the soil and weeds to ensure that the lubricating oil is in direct contact with the moving surface of the cutter.
2. Ensure that the center of the movable blade coincides with the center of the fixed blade. The deviation of less than 1.5 mm is allowed. If the deviation is too large, the length of the crank connecting bolt should be adjusted.
3. The 155 Harvester Blade manufacturer tells you to check the movement of the cutter drive mechanism frequently. If the swing is too large, the bearing clearance should be adjusted or the bearing should be replaced in time.
4. During harvesting operations, pay attention to whether there are hard objects in the fields, such as branches, stones, iron rods, iron wires, etc., to avoid collisions and damage to the blades.
5. The manufacturer of 155 Harvester Blade tells you that you need to remove the cutting blade from the header every 30-50 hours of work, and disassemble it to remove the hardened soil and rice debris left on the blade, clean it and add oil to it. When assembling, check and adjust so that the gap between the movable knife and the fixed knife is maintained at 0-0.5 mm. After the cutter is installed in the header, it should be confirmed that the reciprocating movement is normal before putting it into use.
6. The manufacturer of 155 Harvester Blade tells you that the stubble should not be too low when harvesting. Generally, the distance between the front end of the divider board and the ground should be about 10 cm. If the crop divider is too low, it is easy to gnaw the mud, the cutting knife is easy to wear, and the crop is easy to be crushed.

Related news

Classification summary:
News
2021-11-19 15:28:46
How can Triple blade guard manufacturers show their advantages
The manufacturer of Triple blade guard tells you that as the market becomes more and more standardized, people's requirements for quality of life and demands for brands are getting higher and higher.
2021-11-12 11:35:20
Triple blade guard manufacturer takes you to understand the working principle of the harvester blade guard
The manufacturer of Triple blade guard tells you that the blade guard, as an important part of the combine harvester, is in great demand in the market.
2021-11-03 09:52:18
The Harvester Blade Guard manufacturer takes you to understand what to prepare before using the harvester
The manufacturer of Harvester Blade Guard tells you that it is the autumn harvest season and it is time for the corn combine harvester to show its talents. Before using the corn combine harvester.

Message