30

2021

-

09

155 Harvester Blade manufacturers teach you the quality of harvesters

Author:


155 Harvester Blade manufacturers tell you that the use of harvesters has greatly slowed down the busy days of farmers and friends, so more and more people are starting to buy harvesters.

155 Harvester Blade manufacturers tell you that the use of harvesters has greatly slowed down the busy days of farmers and friends, so more and more people are starting to buy harvesters. 155 The Harvester Blade manufacturer tells you what should you pay attention to when choosing a harvester for people who don't often come into contact with this type of machinery? This should be a problem that troubles everyone. The following harvester blade will solve this problem for everyone:

good price and quality 155 Harvester Blade products
1. The manufacturer of 155 Harvester Blade tells you to see if the surface of the joint is smooth and clean. For example, if there are burrs on the working surfaces of the piston ring and the piston, it will pull the cylinder. If the flywheel is cracked, an accident may occur. To check these parts carefully, lift them up in the air, tap them with a metal hand, and listen to the sound to judge whether there are cracks. A crisp sound is better.
2. The manufacturer of 155 Harvester Blade tells you whether there is rust, mildew, and aging. During storage, if the temperature and humidity in the warehouse do not meet the requirements or other organic solvents are stored, metal parts will rust, paper mats, cork mats and other parts will become moldy and decayed, and rubber parts will age. If the parts are found to be rusty, mildewed or aging, they should not be purchased.
3. The manufacturer of 155 Harvester Blade tells you whether there is any deformation and whether the geometrical size meets the requirements. If the storage method of the parts is not correct, it is easy to deform. For shaft parts such as valve push rods, camshafts, etc., during inspection, put the push rods or camshafts on the counter glass and turn them around to observe the journals of the push rods or camshafts. If there is light leakage, it means bending. When purchasing various types of molded gaskets, you should check the geometric dimensions and shapes.
Fourth, the manufacturer of 155 Harvester Blade tells you to see if the surface protection layer is intact. Many corn harvester accessories are protected by a protective layer when they leave the factory. If the cylinder liner is protected by paraffin, if the wax layer on the parts is found to be lost, the sealing bag is damaged, or the sealing paint is cracked, it should be replaced.

china,155,Harvester,Blade,Wholesale,Price,Low,price,155,Harvester,Blade,for,home,user

Related products

/ PROJECT



Copyright © 2022 Weifang Haihua Development Zone Jintan Harvester Blade Factory