Copyright © 2020 Weifang Haihua Development Zone Jintan Harvester Blade Factory Copyright
Scan the QR code
Weifang Haihua Development Zone Jintan Harvester Blade Factory
Weifang Haihua Development Zone Jintan Harvester Blade Factory is located at the southern end of Luhai Road in Binhai Development Zone. The company was established in 2001 and has modern plants and equipment.
688Harvester Blade manufacturer will take you to understand: the maintenance methods of harvester blades and accessories
The manufacturer of 688Harvester Blade tells you that the harvester is a large-scale machine. When using the harvester, you should pay attention to the inspection of the harvester blade and accessories. Before using the harvester, you should also pay attention to the pre-work inspection of the harvester to avoid malfunctions and affect the harvester operation.
1.688Harvester Blade manufacturer tells you that before the harvester operates, you must survey roads and fields, and clearly mark dangerous areas and obstacles.
2. When maintaining, overhauling and troubleshooting the harvester, the power must be cut off and the engine is turned off; when performing mechanical maintenance or overhaul under the harvesting platform, the harvesting platform must be lifted and supported by safety brackets or cushions. Confirm safety before proceeding; it is strictly forbidden to use open flame lighting when maintaining machinery or refueling at night.
3. When unloading grain, people are not allowed to enter the granary, no iron tools or other tools are allowed to reach into the granary, and grain-receiving personnel are not allowed to reach into or out of the grain silo.
4. When the plot is transferred, lift the harvesting platform to the highest position to lock it, and it is strictly forbidden to use the harvesting platform to carry goods.
5. The manufacturer of 688Harvester Blade tells you to check whether the seats and backrests of the food receivers are firm and reliable at any time.
The manufacturer of 688Harvester Blade tells you that there are many types of working parts. Commonly used are circular saw blades, blades or nylon wires. During operation, hang the shackle on the aluminum alloy casing of the drive shaft on the strap under the operator's shoulder, hold the handle, and swing the hard shaft laterally to complete cutting weeds and shrubs.
What are the maintenance methods of harvester accessories:
1. The harvester accessories should be placed correctly
The manufacturer of 688Harvester Blade tells you that if you want to make the harvester accessories easier to use when in use, then you should regularly maintain the harvester accessories, so that the harvester accessories can be of better quality when placed, then this Will make this easier to install when used.
2. Pay attention when installing
The manufacturer of 688Harvester Blade tells you that the harvester accessories professionals recommend that you pay attention to the size of this accessory when installing. If the size is not appropriate, it will not be possible during installation.