Weifang Haihua Development Zone Jintan Harvester Blade Factory

News

Industry News

Company News

Home page

2021

Daily maintenance of Harvester Blade (Side knife) and harvester

Author:

An important component on the harvester is the Harvester Blade (Side knife). The purpose of the Harvester Blade (Side knife) is to cut crops to enter the harvester machinery.

An important component on the harvester is the Harvester Blade (Side knife). The purpose of the Harvester Blade (Side knife) is to cut crops to enter the harvester machinery. Therefore, the maintenance of the Harvester Blade (Side knife) should not be ignored. Carefully maintain the Harvester Blade (Side knife) so that it can give full play to its maximum value during operation. It is not only the maintenance of the Harvester Blade (Side knife), but also the adequate maintenance of the harvester. Take the corn harvester as an example:

customized Harvester Blade (Side knife) components
Before each operation of the corn harvester, the connection of each component should be checked, especially the Harvester Blade (Side knife) of the crushing device, the scraper of the conveyor and the fastening of the slats, and tighten them if necessary. In addition, pay attention to the fixing of the wheels to the hub.
Before each operation of the corn harvester, the dust remaining in each part and the attachments left over from the previous operation should be cleaned up in time.
Before each operation of the corn harvester, check the tension of the V-belt, transmission chain, feeding and conveying chain, and check the reduction box, closed gear transmission box lubricating oil and hydraulic system hydraulic oil for leaks and deficiencies, if problems are found It must be dealt with in time, so as to avoid failures during operation that outweigh the gains.
The working environment of the harvester is very harsh, so try not to expose the machine to the sun at ordinary times. Even the Harvester Blade (Side knife) should be oiled daily to prevent rust.