Address: The southern end of Luhai Road, Binhai Development Zone, Weifang, Shandong Province
Contact: Chen Jintuan
Phone:13905360309
Tel:0536-5333577
PC:262737
Web:www.wfjintan.cn 收割机刀片.中国 金坛刀片.中国
E-mail:lily@wfjintan.cn sgjintandp@163.com
Copyright © 2020 Weifang Haihua Development Zone Jintan Harvester Blade Factory Copyright
Scan the QR code
Weifang Haihua Development Zone Jintan Harvester Blade Factory
Weifang Haihua Development Zone Jintan Harvester Blade Factory is located at the southern end of Luhai Road in Binhai Development Zone. The company was established in 2001 and has modern plants and equipment.
Harvester Blade (Side knife) maintenance tips
1. Strictly follow the Harvester Blade (Side knife) lubrication chart, the lubrication part of the table, the cycle time and the oil type in the combine harvester manual to carry out the lubrication.
2. Check the connection of each component of the Harvester Blade (Side knife), and tighten it immediately if it is loose. In particular, check the blades of the crushing device, tighten the scraper conveyor, and see if the panel is deformed or damaged.
3. Clean the Harvester Blade (Side knife). After cleaning, wipe the anti-rust agent on the surface of the Harvester Blade (Side knife) to prevent the Harvester Blade (Side knife) from being rusted.
4. Remove the Harvester Blade (Side knife) assembly, apply rust inhibitor to the horizontal plate after cleaning, or hang it to avoid deformation.
5. Clean the sprocket and apply anti-rust agent on the surface of the sprocket to avoid rust. In addition, lubrication is carried out on each contact moving part of the sprocket.
6. For the new or newly repaired combine harvester, all the oil in the gearbox should be drained after the trial operation is completed, and new oil should be added after cleaning and tidying. Check the fuel quantity once a week during work, and add it immediately when it is lacking.