Address: The southern end of Luhai Road, Binhai Development Zone, Weifang, Shandong Province
Contact: Chen Jintuan
Phone:13905360309
Tel:0536-5333577
PC:262737
Web:www.wfjintan.cn 收割机刀片.中国 金坛刀片.中国
E-mail:lily@wfjintan.cn sgjintandp@163.com
Copyright © 2020 Weifang Haihua Development Zone Jintan Harvester Blade Factory Copyright
Scan the QR code
Weifang Haihua Development Zone Jintan Harvester Blade Factory
Weifang Haihua Development Zone Jintan Harvester Blade Factory is located at the southern end of Luhai Road in Binhai Development Zone. The company was established in 2001 and has modern plants and equipment.
Harvester Blade Guard manufacturer takes you to understand: knowledge of harvester blade maintenance
The manufacturer of Harvester Blade Guard tells you that the harvester is a large-scale combined machine. The main purpose of the harvester is in the busy farming season. Like now, after the autumn harvest, the harvester should be idle again and wait for the harvest in the coming year. The Harvester Blade Guard manufacturer tells you that in the idle time, all accessories on the harvester should be maintained, especially the harvester blade.
The manufacturer of Harvester Blade Guard tells you to conduct a careful investigation of the more easily damaged parts on the harvester machine, especially for the parts of the harvester blade that often work in harsh environments, such as the harvester blades, etc., if excessive wear is found, it should be repaired immediately. If it cannot be repaired, replace with new parts, so as to avoid problems in the operation that outweigh the gains. The vulnerable parts of the friction part, such as cutter, clutch claw, auger telescopic rod, adjusting bolt, etc., should be coated with oil or butter to prevent corrosion. The manufacturer of Harvester Blade Guard tells you that the parts whose paint has been worn out or rusted should be derusted first, and then repainted.
The Harvester Blade Guard manufacturer tells you to clean up the dust, debris, grain and other debris inside and outside the harvester, and rinse them with tap water. Then unload the triangle tape and wipe it clean, coated with talcum powder, and attached with a label. It is best not to place it in a dark and humid environment. Then remove the chain, clean it in diesel oil, coat it with engine oil or butter, wrap it in kraft paper, and store it in a ventilated and dry place.
The manufacturer of Harvester Blade Guard tells you that you must pay attention to maintenance when the harvester is idle, so that it will not delay work when using the harvester. The harvester blade itself is a particularly vulnerable part, so pay more attention to the maintenance of the harvester blade. Once the damage is found, repair it immediately.